Icom 706 mkIIg IF tap
just my experience using the PAT IF buffer from SDR-KITS.COM. power pick off point… 7.8VDC on recieve First IF tap point and coax connection to the PAT board. Note the…
BC 780XLT IF Tap
Several years ago, I modified a Softrock kit to operate at 455 kHz. The main purpose behind this build was to add the ability to connect it to a receiver’s…
Adding IF Taps to the FT-1000 for Station Monitoring
So, about a year ago, I decided I wanted to tinker with SDRs. Many of these, such as the Flex radios, were way too expensive – so I looked into…