RT Systems Software for Anytone radios – some more discoveries
I’ve started delving more into the software, and editing my old codeplug, at least for the 578. I’ll try and more or less synchronize it with the 878 later. As…
RT System’s Software: Anytone 878, First Impressions, and a 578 follow up
There’s not much to be said here – the 878 software is almost identical to the 578, but it’s tailored for the slightly different feature set. I was hoping I…
RT Systems’ Anytone 578 Software: Quick Update 1
In my previous post, I noted that the RT Systems software had at least one flaw in the development environment, which was causing an error when opening certain menus. I…
RT Systems’ Anytone 578 Software: Initial Impressions
Initial Thoughts: I bit the bullet and paid $25 for the RT systems software for my Anytone 578, because, well, the Anytone software is junk…. but it’s the same look…
Astatic RD104 “Road Devil” Battery Eliminator Mod…for radios with power at the mic jack
With the sunspot cycle coming to a point of good higher frequency propagation, I put a 10 meter radio in the car. Why not? The President Lincoln II+ has some…
SteppIR Antenna and Station Integration (Update)
Well, the original configuration (SteppIR controller passing commands between the radio and PW-1) worked… for a while. I suspect there was some collision or synchronization that fell out of timing…
Mini1300 Antenna Analyzer: Initial Impressions
I’ll spare the reader yet another glowing review for the Mini1300 analyzer. No I won’t – I’m still going to spew my thoughts on this thing. I picked one up…
SteppIR Antenna thoughts
Background Last year, I acquired a SteppIR “SmallIR 80” antenna… This is their “SmallIR” 20 – 6 vertical, with an additional coil for 30/40/80 meters. I don’t know if it’s…
Icom 7300 Front Panel Interface Box
I love the Icom 7300 – it has a TON of features. One of the intriguing features is the voice keyer – the radio has 8 memory slots, four of…
EMI – some basics…
I’ve been an electromagnetic interference (EMI) engineer for… well… a bunch of years at this point. As such, I’ve learned a lot about how to tackle problems, and how to…